EmpireReborn.net

I have about 20 missions pilot files on the Ice , waiting to be processed. Some XWA and some XvsT.

LT Stark is busy in RL and I want to know if anyone as time to take care of them. I've already lost to many points since some of my files were processed out of chapter.

JAG: I'm on my way to the top!

Thank you!

P.S. I've already tried following the chain of command. This is the next step.

Jag has 20 or so missions in admin waiting to be processed...

And I've got 12. So?

Anyway, MAR, my recommendation is to have your SCS take care of them, then. Wedge probably can handle it.

I can handle all XvT and TIE files easily. But unfortunately I have yet to find a decent XWA pilot viewer. If someone can help me find one I would appreciate it.

Load 'em in to XWA and view there. That's what I do.

You might also try the Central Imperial File Database.

CM La Forge wrote:And I've got 12. So?

Anyway, MAR, my recommendation is to have your SCS take care of them, then. Wedge probably can handle it.

:: Jansen deletes a cretin 12 FPRs ::

Wedge: Darksaber has a couple, and I used the top one until I made my own
The IDMR version is command promt (haven't figured out C++ WinApp yet ), but will do all three platforms, and give the info needed. (If you have the .NET Framework, I can give you a much better version which is the one I actually use)

MAR: Yeah, I noticed that

BTW, I just have Col Fel to process in admin and a few after action reports for the army and scores should be up to date.. I am going to try to get it done tonight.

CM La Forge wrote:Load 'em in to XWA and view there. That's what I do.

You might also try the Central Imperial File Database.

Windows 2000 and joystick problems, remember? You can't install XWA without a joystick, and Windows 2000 does not recognize my joystick.

Jagged Fel wrote:Wedge: Darksaber has a couple, and I used the top one until I made my own
The IDMR version is command promt (haven't figured out C++ WinApp yet ), but will do all three platforms, and give the info needed. (If you have the .NET Framework, I can give you a much better version which is the one I actually use)

The one's on Darksaber do not appear to work properly. But I do have .NET if you have a copy of that viewer handy.

I'm using Jag's command prompt version of the pilot viewer, and it works fine.

CL Wedge: I'll send you my XvsT files if you don't mind.

General: I hope I will get the points for my fictions with your new update.



So , any volunteer to process my XWA files? Promote me to a decent rank and I'll do yours. :p

CM La Forge: Any free LT spot on the Chimaera yet?

If you people would actually bother to check out my announcements, emails, reports, etc....

There is THE best XWA pilot file viewer right under your nose at IS.Net in the XWA downloads section.....

Well. I offer my help to the one who needs it to process files in the FPR. This offer is for the LT and Commanders that they are with a lot of work, of course. If some pilot wishes me to process his files, it must be provided with the authorization of his chain of command corresponding.
My process time is between 48 and 72 hours maximum.
I can process files Tie, XvT, XWA and GB. Although my preference is for files XvT and GB.
Only send the files to my e-mail erbranet@yahoo.com (with the information of the pilot, of course).
Greetings to all.
Vortagh: I upload some missions GB in his site http://www.tactical.empirereborn.net/
Is there any possibility that they are checked?
Thanks, Sir.
LT Branet
---------------

Vortagh wrote:There is THE best XWA pilot file viewer right under your nose at IS.Net in the XWA downloads section.....

Both of which link to the same page on Darksaber's site that I did

Wedge: Alright, I'll email that one to you.

Hey, Colonel Fel's view works just fine, even if it is a bit clunky and DOS-like.

Sorry, Jag, 'tis true.